Friday, June 11, 2010

Within 5/8" of my life

It's easy for me to forget that most people spend less than 80% of their waking hours around high-voltage, pressurized equipment and, as such, have far less opportunity to learn the valuable lessons that can only come from working with high-voltage, pressurized equipment.

In fact, I find I learn these lessons on an almost daily basis. Today, for example, I learned that Type L 5/8" O.D. soft copper tubing is either a) sixty feet long or b) contains materials known to the state of California to be hazardous. Although I'm not sure how total length affects whether or not the tubing is hazardous, there is clearly a correlation. And while I would be happy to buy 60' of tubing even though I only need 10' if that means I wouldn't be source of an army of mutant babies from Emeryville, I'm worried that only sixty continuous feet of tubing will actually remain free of hazards, so as you can see, I'm in a bit of a bind: Either I create an elaborate rollercoaster of copper tubing in our already cramped warehouse, or everyone who drinks my lattes ends up looking like Jeff Goldbloom at the end of "The Fly."

Oddly, 1/2" soft copper tubing doesn't seem to have this issue, nor does 3/8" or 1/4". Also these sizes are available at any hardware store with a plumbing department, whereas neither Home Depot nor Ashby heating and plumbing had 5/8". Although I am happy to report that, for those in need of 5/8" soft copper tubing, it can be found at Ashby Lumber (contains hazardous materials) and Rubenstein Supply (sixty feet long).

That said, everything else is in place for us to open a small retail operation out of the warehouse. I have recently returned old one-eye to it's original housing, and I'm happy to say it looks very sleek and 80s (which is to say tremendously boxy). In honor of this transformation, I am rechristening it Johnny 5 after the eponymous robot protagonist of the Short Circuit movies. Here is a direct comparison:



Right?

Keep drinking coffee.

-Ian

1 comment: